By registering with our site you will have full instant access to:
268,000 posts on every subject imaginable contributed by 1000's of members worldwide.
25000 photos and videos mainly relating to the British Merchant Navy.
Members experienced in research to help you find out about friends and relatives who served.
The camaraderie of 1000's of ex Merchant Seamen who use the site for recreation & nostalgia.
Here we are all equal whether ex Deck Boy or Commodore of the Fleet.
A wealth of experience and expertise from all departments spanning 70+ years.
It is simple to register and membership is absolutely free.
N.B. If you are going to be requesting help from one of the forums with finding historical details of a relative
please include as much information as possible to help members assist you. We certainly need full names,
date and place of birth / death where possible plus any other details you have such as discharge book numbers etc.
Please post all questions onto the appropriate forum

-
2nd November 2018, 11:36 AM
#11
Re: Another cruise ship mishap

Originally Posted by
robpage
cars on ferries held on handbrake only
I have used the N. Shields - Ijmuiden ferry quite a bit and am sure they lash down all vehicles. Big advantage to have a little heavy weather, queues for dinner buffet were much shorter ha ha!
-
3rd November 2018, 05:47 AM
#12
Re: Another cruise ship mishap
Can remember looking over the side of a UCL liner and seeing quite clearly the stabilisers sticking out from the ships side when in very clear water.
Have not seen any on any of the cruise ships we have been on. Yet the draught is about the same at around 8 meters.


Happy daze John in Oz.
Life is too short to blend in.
John Strange R737787
World Traveller

-
Post Thanks / Like
-
3rd November 2018, 05:54 AM
#13
Re: Another cruise ship mishap
On the UCL Ships i was on John we had no stabilisers,possibly on later ones they started!
Cheers
Senior Site Moderator-Member and Friend of this Website
R697530
-
Post Thanks / Like
-
3rd November 2018, 05:56 AM
#14
Re: Another cruise ship mishap

Originally Posted by
Doc Vernon
On the UCL Ships i was on John we had no stabilisers,possibly on later ones they started!
Cheers
Certainly on the Windsor, saw them in the engine room on a couple of occasions, and no doubt the Transvaal.


Happy daze John in Oz.
Life is too short to blend in.
John Strange R737787
World Traveller

-
3rd November 2018, 06:20 AM
#15
Re: Another cruise ship mishap
Pendennis was the first, design changed at the Cayzer Irvine take over
Rob Page R855150 - British & Commonwealth Shipping ( 1965 - 1973 ) Gulf Oil -( 1973 - 1975 ) Sealink ( 1975 - 1986 ) 

-
Post Thanks / Like
-
3rd November 2018, 09:42 AM
#16
Re: Another cruise ship mishap
We certainly never had them on the old Stirling Vernon lol, we never even had a decent fire detection system. As a bridge boy i had to check this large glass box on the bridge at certain times, which consisted of a series of marked tubes from different areas, in the event of fire the smoke was supposed to show coming through one of the tubes !!1, i kid you not. i think i had to get off of my little stool and check every 15 mins, apart from being gofor , and running messages. happy days, kt
R689823
-
Post Thanks / Like
-
3rd November 2018, 10:15 AM
#17
Re: Another cruise ship mishap
was a Kiddie -Rich system . I expect
Rob Page R855150 - British & Commonwealth Shipping ( 1965 - 1973 ) Gulf Oil -( 1973 - 1975 ) Sealink ( 1975 - 1986 ) 

-
3rd November 2018, 12:33 PM
#18
Re: Another cruise ship mishap

Originally Posted by
vic mcclymont
It has been reported that the Carnival Sunshine had a failure with a stabiliser at the weekend.
Frightened passengers reported that the ship heeled over so far that items were falling from shelves and that they could not stand upright.
Carnival have stated that the ship had a problem with one of the stabiliser fins.
Some passengers have refused to continue the cruise and are being flown home.
Sounds like the fin has got locked in one position.
Vic
If my memory serves correctly stabilizer systems have a device on the bridge whereby the stabilizers can be used to induce rolling; this to test them while still in calm seas, such as leaving port. seems to me there was a screw up on this occasion.
-
Post Thanks / Like
-
3rd November 2018, 01:42 PM
#19
Re: Another cruise ship mishap

Originally Posted by
Keith Tindell
We certainly never had them on the old Stirling Vernon lol, we never even had a decent fire detection system. As a bridge boy i had to check this large glass box on the bridge at certain times, which consisted of a series of marked tubes from different areas, in the event of fire the smoke was supposed to show coming through one of the tubes !!1, i kid you not. i think i had to get off of my little stool and check every 15 mins, apart from being gofor , and running messages. happy days, kt
Hi Keith
That glass box you mentioned worked really well on the "Oronsay". In the mid 60's it went off one Sunday afternoon, No 5 hatch was on fire a mail bag hatch, seems a docker in Yokohama did not put his cigarette out properly. Next day docking at Kowloon ( Hong Kong ) Fire engines all along the dock, it destroyed most of the mail and other bits of cargo
(Transistor Radios etc) plus smoke damaged lots of passenger cabins on E Deck.
Last edited by Graham Payne; 3rd November 2018 at 01:47 PM.
Graham R774640
-
Post Thanks / Like
-
3rd November 2018, 09:54 PM
#20
Re: Another cruise ship mishap
I actually thought they had a smoke detector on the top so if there's any smoke in any tube it ranking alarm the ones I was on dated back pre 1950
Rob Page R855150 - British & Commonwealth Shipping ( 1965 - 1973 ) Gulf Oil -( 1973 - 1975 ) Sealink ( 1975 - 1986 ) 

-
Post Thanks / Like
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules