By registering with our site you will have full instant access to:
268,000 posts on every subject imaginable contributed by 1000's of members worldwide.
25000 photos and videos mainly relating to the British Merchant Navy.
Members experienced in research to help you find out about friends and relatives who served.
The camaraderie of 1000's of ex Merchant Seamen who use the site for recreation & nostalgia.
Here we are all equal whether ex Deck Boy or Commodore of the Fleet.
A wealth of experience and expertise from all departments spanning 70+ years.
It is simple to register and membership is absolutely free.
N.B. If you are going to be requesting help from one of the forums with finding historical details of a relative
please include as much information as possible to help members assist you. We certainly need full names,
date and place of birth / death where possible plus any other details you have such as discharge book numbers etc.
Please post all questions onto the appropriate forum
As I feel there are quite a few on here that have NOT updated their Email addresses, can you please do so. It is of importance that your Email is current, so as we can contact you if applicable . Send me the details in my Private Message Box.
Thank You Doc Vernon
Please log in with your username and password
-
2nd April 2018, 02:48 AM
#21
Re: Shore supply electrics
#19. Vic you mention the Pendennis was this a castle ship ? if so I would suppose she had all the modern equipment going at the time. The DC ships I was on had to have an inverter or converter whatever they are called for the gyro compass which ran on a/c only and involved carbon piles to keep the current constant or else the gyro wandered. I never saw a lecky on a d/c ship was always the 3 Engineers extra duties. On the a/c ships must have been a holiday for the 3rd. Although he must have lost a lot of overtime. Cheers JWS
-
2nd April 2018, 03:07 AM
#22
Re: Shore supply electrics
In reply to Vic I think the Windsor was 440 VAC with a combination of Harland and Wolff diesels and Alan steam turbo alternators .
The Pendennis Castle as an DC ship had a room immediately above the main switchboard where there were I think 4 off DC driven alternators these provided power from a DC supply in to give you a 240 V AC output I believe that was for some lighting and things like the giro but we are talking 1970 here so I could be wrong . The dc driven alternators were in my time they're absolutely trouble-free . I can't remember if the last two of the big male boats wer 440 volt 60 cycle but every ship I have been on since those days mainly German or Scandinavian built always seems to be 440 volt 60 cycle instead of the UK standard of 400 volt 50 cycle . This of course saved a fortune in copper when building a ship . I always suspected that this was one of the main troubles with the British and Commonwealth desire to run the Rolls-Royce d series diesel generators as I'm absolutely convinced in my head that they were designed to run at 1500 RPM which would have given 50 Cycles but we run at 1800 RPM to give the 60 Cycles and when you are running them at 20% more revs you still kept the service hours so they done 20% more work in the same hours lending to them having a nasty tendency to check conrods out through the side of the crank case .
Rob Page R855150 - British & Commonwealth Shipping ( 1965 - 1973 ) Gulf Oil -( 1973 - 1975 ) Sealink ( 1975 - 1986 ) 

-
Post Thanks / Like
-
2nd April 2018, 03:34 AM
#23
Re: Shore supply electrics
Going back to more mundane things like washing machines and hoovers. When we emigrated out here we stuck everything into a container and brought out with us, only instead of the kitchen sink we brought out the carpets. everything electricai however seemed to have a short life span could this have been because the UK was 50 cycles and out here is I believe 60 ? JWS
-
Post Thanks / Like
-
2nd April 2018, 03:49 AM
#24
Re: Shore supply electrics
Everythinmg runs 20% faster , the speed (N) rpm = 120 x frequency (f) Hz / number of motor poles (P) , so a two pole motor at 50 Hz is 3000 rpm 60 Hz 3600 rpm , the electronics is transformed to 12 VDC so you get away with it mainly
Rob Page R855150 - British & Commonwealth Shipping ( 1965 - 1973 ) Gulf Oil -( 1973 - 1975 ) Sealink ( 1975 - 1986 ) 

-
Post Thanks / Like
-
2nd April 2018, 06:20 AM
#25
Re: Shore supply electrics

Originally Posted by
vic mcclymont
The Pendennis was DC the Vaal AC, what was the Windsor, any ideas Rob?
Vic
The Windsor was DC and yes may well have used shore power.
I know as officers steward that on Wednesdays prior to sailing the engineers would spend the day prepping up to full power.
Of course there were many crew on UCL who were AC/DC/
Any crew member who had a record player or tape recorder had to have a converter from dc to ac to enable them to work.
Last edited by happy daze john in oz; 2nd April 2018 at 06:26 AM.


Happy daze John in Oz.
Life is too short to blend in.
John Strange R737787
World Traveller

-
Post Thanks / Like
-
2nd April 2018, 08:42 AM
#26
Re: Shore supply electrics
There we have it from Rob and John the Windsor Castle in keeping with the crew was AC/DC.
Rob, all of the UK ships that I did design work were 60 cycles as that was the maritime standard.
Vic
Last edited by vic mcclymont; 2nd April 2018 at 08:44 AM.
-
Post Thanks / Like
-
2nd April 2018, 10:13 AM
#27
Re: Shore supply electrics
The idea of cold ironing is nothing new. But it is not just about the emissions of CO2, don't forget there is also CO(carbon monoxide) NOx(Nitrogen Oxide) is also highly toxic along with other exhaust emissions. Some one said that power stations also pump out a lot of Toxic emissions as well but at least it is not as bad as having 25/50 ships pumping out there crap, Also a lot of power stations these days are now fuelled by LNG which certainly is a cleaner emission than say the likes of Coal fired stations.
When I first got into LNG carriers when we were loading or discharging the vapour was always returned to shore side and in my early days it was just flared off (burnt) Now in some ports the return vapour is reliquefied and sent back to the ship as cargo. In other ports they allow the ship to continue using the gas generated to be used to fuel the boilers there by causing less pollution in port areas. Modern LNG carriers are even more fuel efficient as they are now nearly (all new builds) are motor ships but are dual fuelled either by low sulphur fuels or LNG.
-
Post Thanks / Like
-
2nd April 2018, 11:12 PM
#28
Re: Shore supply electrics

Originally Posted by
vic mcclymont
Los Angles forces ships to shut down their own power plant and connect to shore side.
They claim that it reduces CO2 emissions, can't see how as shore plant produces CO2.
Vic
It's the same logic that electric cars are enviromentally friendly as they don't produce emissions. What is conviently forgotten is how the electricity that charges these cars is produced...
SDG
-
Post Thanks / Like
-
3rd April 2018, 06:17 AM
#29
Re: Shore supply electrics

Originally Posted by
Shaun Gander
It's the same logic that electric cars are enviromentally friendly as they don't produce emissions. What is conviently forgotten is how the electricity that charges these cars is produced...
SDG
And there lies the problem, how to produce power without using coal, gas etc.
A study here in Oz has shown that if all our vehicles were electric the load on the grid would be up to five times what it is now.
Solar and wind would not be able to generate enough on a constant reliable method.
So how do we manage it?
But as an aside I saw over the last week end of Easter some 5 service statins being built, so much for electric cars.


Happy daze John in Oz.
Life is too short to blend in.
John Strange R737787
World Traveller

-
Post Thanks / Like
-
3rd April 2018, 09:45 AM
#30
Re: Shore supply electrics
The way to go is the Hydrogen cell only thing that comes out the exhaust pipe is H2O.
But as usual someone will find a down side to everything.
How is this for being negative in your thinking
Fuel Cells are not Pollution Free: Where Will the Water Go? to me Big Oil is not in any rush just yet to save the planet.
-
Post Thanks / Like
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules