Page 4 of 5 FirstFirst ... 2 3 4 5 LastLast
Results 31 to 40 of 42

Thread: Thomson Majesty

  1. #31
    Join Date
    Apr 2009
    Location
    Cebu, Philippines district of Punta Princessa.
    Posts
    1,855
    Thanks (Given)
    0
    Thanks (Received)
    39
    Likes (Given)
    0
    Likes (Received)
    37

    Default THOMPSON MAJESTY

    ​I WOULD IMAGINE CRUISE SHIPS LIFEBOATS ARE USED MORE THAN ANT OTHER TYPES OF SHIPS, SO THE WEAR WILL BE GREATER, MAYBE RENEWALS SHOULD BE SOONER ON CRUISE SHIPS, WOULD IMAGINE ALL ABOARD THAT SHIP NEED RENEWING, THOSE ARE HEAVY BOATS PUT A LOT OF STRAIN ON THE GEAR.
    Tony Wilding

  2. #32
    Join Date
    Aug 2008
    Location
    W.A.
    Posts
    25,448
    Thanks (Given)
    13695
    Thanks (Received)
    14617
    Likes (Given)
    20196
    Likes (Received)
    81702

    Default Broken wire

    Tony ref. the picture of the broken wire. I have already mentioned from my point of view the past maintainace which occured under the BOT regs. It would certainly clear the air a bit re the accident if the wire certificate was made available to the public, which would state the date of manufacture and fitting, SWL and various other information. Also on the back of the LSA ( Life Saving Appliances) certificate it used to be normal practice to have record of wires, when changed etc. This would under circumstances of old be checked by a BOT surveyor on a yearly basis. Just out of nosiness would be nice to know if such standards are kept to what they used to be. The changing of wires etc. used to come under general maintainance by ships personel. I often wondered when crew sizes were diminshed what happened to ships maintainance, I brought this up several times with various owners, and was always assured that shore staff would do any necessary work. I know from experience that in a lot of cases this was just wishful thinking. I know there are a lot of Lifeboats on a Passenger vessel and a lot of wires, and probably has a department to themselves for such records, if they havent then they should have this delegated to some authority, whether ashore or on board. Regards John Sabourn

  3. #33
    Join Date
    Jun 2008
    Location
    Sunbury Victoria Australia
    Posts
    26,164
    Thanks (Given)
    9439
    Thanks (Received)
    10580
    Likes (Given)
    111916
    Likes (Received)
    47681

    Default

    Looking at the photo of the wire it would appear to be in bad condition. From it I can see no eveidence of any grease so wonder just how much care has been taken on this one.
    Happy daze John in Oz.

    Life is too short to blend in.

    John Strange R737787
    World Traveller

  4. #34
    Join Date
    Aug 2012
    Location
    Berkshire
    Posts
    154
    Thanks (Given)
    0
    Thanks (Received)
    2
    Likes (Given)
    0
    Likes (Received)
    7

    Default

    I didn't come across too many wires parting under strain but the few I did showed more signs of stranding. The break in the picture seems very short and looks as though the wire was already weakened in one area possibly by kinking.

    Regards
    Calvin

  5. #35
    Join Date
    Aug 2008
    Location
    W.A.
    Posts
    25,448
    Thanks (Given)
    13695
    Thanks (Received)
    14617
    Likes (Given)
    20196
    Likes (Received)
    81702

    Default Boat Falls

    If I remember boat falls were specially constucted self lubricating wire were not like an ordinary wire one could splice. Might be thinking of something else but dont think so. Were more like a plaited rope and made specifically for what they were designed for. Cheers John Sabourn.

  6. #36
    Join Date
    Jun 2008
    Location
    Sunbury Victoria Australia
    Posts
    26,164
    Thanks (Given)
    9439
    Thanks (Received)
    10580
    Likes (Given)
    111916
    Likes (Received)
    47681

    Default

    Very true John. I was able to syudy at close range the ones on our last cruise ship, the boat deck was one below us and I often watched the lifeboats used as tenders being lowered. Yes it did appear the wires were in some form of grease pan as there was evidence of plenty of it. The one in the photo looks very dry and almost rusted.
    Happy daze John in Oz.

    Life is too short to blend in.

    John Strange R737787
    World Traveller

  7. #37
    Join Date
    Aug 2008
    Location
    W.A.
    Posts
    25,448
    Thanks (Given)
    13695
    Thanks (Received)
    14617
    Likes (Given)
    20196
    Likes (Received)
    81702

    Default Tenders

    Thought you were going to say fenders for a moment and not tenders. Cheers John Sabourn

  8. #38
    Join Date
    Jun 2008
    Location
    Cooma NSW
    Posts
    10,038
    Thanks (Given)
    11386
    Thanks (Received)
    5672
    Likes (Given)
    48471
    Likes (Received)
    29310
    Blog Entries
    1

    Default

    Hi John.
    You are right the wires on the lifeboat falls that I remember were not splicable, even the old rope falls had to be a continous run any fraying and the whole rope was replaced.
    Cheers Des

  9. #39
    Join Date
    Aug 2008
    Location
    W.A.
    Posts
    25,448
    Thanks (Given)
    13695
    Thanks (Received)
    14617
    Likes (Given)
    20196
    Likes (Received)
    81702

    Default

    Thanks Des, thought after writing I might have been getting mixed up with the wire on the Patent Sounding Machine which believe was piano wire. However see no reports yet on any suggestion on the age of wires in question. I dont know how old the vessel is, but it shouldnt be too hard for any investigative reporter to find out the age of the wires etc. when they were last replaced etc. As said it used to be every 3 years they had to be replaced, the third year on an end for ended wire, to my knowledge. For the peace of mind of the victims familys this should be done if for nothing else. All the other wires on boats would I have thought also be checked for age etc. or is this too hard a job for our Press. Maybe not enough sellage of newspapers with such reporting. However even for those people who do cruising their minds should be put at rest that maintainance is being carried out on these vessels. It is not a big job and could nearly be done by phoning around, and sighting the actual wire certificates. Regards John Sabourn

  10. #40
    Join Date
    Jul 2009
    Location
    Waterlooville Hampshire UK
    Posts
    6,936
    Thanks (Given)
    1693
    Thanks (Received)
    3691
    Likes (Given)
    3684
    Likes (Received)
    13355

    Default

    Looking at that cable that seems to me to be quite a catastrophic failure , To have snapped like that I would think that the whole thing was shocked very severely an had corrosion present . Out of Interest the Ship is Greek , registered in Malta in a Spanish Port with various other nationalities who died , Is the investigation under the jurisdictional of the Spanish courts , and to see justice for the crewmen who tragically lost their lives does their own country hold an inquest or is it all like yesterdays news just swept aside
    Rob Page R855150 - British & Commonwealth Shipping ( 1965 - 1973 ) Gulf Oil -( 1973 - 1975 ) Sealink ( 1975 - 1986 )

Page 4 of 5 FirstFirst ... 2 3 4 5 LastLast

Similar Threads

  1. Good job her Majesty was not aboard
    By Chris Allman in forum Merchant Navy General Postings
    Replies: 0
    Last Post: 31st March 2013, 03:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •