Page 3 of 3 FirstFirst 1 2 3
Results 21 to 23 of 23

Thread: Rigging

  1. #21
    Join Date
    Aug 2008
    Location
    Torquay
    Posts
    10,244
    Thanks (Given)
    3122
    Thanks (Received)
    6407
    Likes (Given)
    9799
    Likes (Received)
    26763

    Default Re: Rigging

    [QUOTE=Lewis McColl;368713]I Did this practice come about as part of the recommendations from the Derbyshire enquiry. /QUOTE]

    The carving note originated in the sailing ship days, hence its name. The official number in the Derbyshire days and long before was carved in the main thwartship beam on the aftend hatch coaming of the hatch immediately below the bridge structure. This was also true of vessels with midships accommodation, it was carved into the hatch coaming below the bridge accommodation. It must have been changed around the 70's to being allocated on external structure, one of the more sensible moves of IMO. I know on doing surveys on vessels that it wasn't always possible to see the carving on the coaming as there would be cargo stowed against the coaming, and it was never at the top of the coaming but always (in my experience) just above the lower rubbing bar where it was offered some protection from cargo runners being lead under the coaming to drag cargo out

  2. Thanks Doc Vernon, Lewis McColl thanked for this post
    Likes Des Taff Jenkins liked this post
  3. #22
    Join Date
    Jun 2009
    Location
    North East Scotland
    Posts
    697
    Thanks (Given)
    816
    Thanks (Received)
    560
    Likes (Given)
    5328
    Likes (Received)
    1667

    Default Re: Rigging

    Lewis #16 Tandem lifts as you described on a pedestal mounted on a vessel are one thing but from the shore to a vessel using two cranes is another matter. My employers would not sanction it, for insurance considerations. It required a lift master in charge guiding both cranes at that time with radio phones, tricky work.
    Attached Images Attached Images

  4. #23
    Join Date
    Jun 2008
    Location
    Cooma NSW
    Posts
    6,240
    Thanks (Given)
    5873
    Thanks (Received)
    3613
    Likes (Given)
    24685
    Likes (Received)
    16751

    Default Re: Rigging

    Rigging a Jumbo was one of the best jobs that I did when going to sea. we took some trains to Aus , I couldn't wait to get stuck into all those wires and blocks, my one regret was I didn't have a camera.
    Des
    Lest We Forget

Page 3 of 3 FirstFirst 1 2 3

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •