By registering with our site you will have full instant access to:
268,000 posts on every subject imaginable contributed by 1000's of members worldwide.
25000 photos and videos mainly relating to the British Merchant Navy.
Members experienced in research to help you find out about friends and relatives who served.
The camaraderie of 1000's of ex Merchant Seamen who use the site for recreation & nostalgia.
Here we are all equal whether ex Deck Boy or Commodore of the Fleet.
A wealth of experience and expertise from all departments spanning 70+ years.
It is simple to register and membership is absolutely free.
N.B. If you are going to be requesting help from one of the forums with finding historical details of a relative
please include as much information as possible to help members assist you. We certainly need full names,
date and place of birth / death where possible plus any other details you have such as discharge book numbers etc.
Please post all questions onto the appropriate forum
-
6th November 2019, 09:25 AM
#21
Re: Ship Painting Days
Probably didn't order too much paint - you lot didn't do enough painting...
-
Post Thanks / Like
-
6th November 2019, 11:06 PM
#22
Re: Ship Painting Days
Hi David.
In the 40s and 50s when the tide went out in Swansea Bay you had to wade through crude oil to reach the sea, surprised no one took it up as a skin product.
Des
-
Post Thanks / Like
-
6th November 2019, 11:41 PM
#23
-
10th November 2019, 07:55 AM
#24
Re: Ship Painting Days
Most ex-Port Line deck hands will recall favourably or otherwise, how the company maintained a very high standard of paintwork on runs to Aus and NZ. This maintenance required considerable overtime - at least it did on my Port Line voyages. Overtime meant money - clearly, which most hands were willing to work for and gather. Overtime hours worked were of less consequence.
In the mid 1950's horror struck as the bosun's mate handed out a new device, which went under the name of a 'Paint Roller', to replace the wide brushes previously used. One didn't need to be an Einstein to realise painting would now be faster and overtime slower, to the detriment of money which would be less. Over-the-side and funnel painting was not the same afterwards.
During the late 1940's/early 1950's there existed a small ship dry-dock at Auckland, now long gone. Sometimes, on a Saturday, Port Line deck hands would be asked to work on a ship in the dry-dock, mainly chipping hammer jobs, plus red-leading. This was a favoured task as earnings were in cash often before sailing. All work done at the dry-dock was approved by our ship's First Mate who also doled out the incoming cash in those now olde fashioned tiny brown envelopes. No-one would dare ask how the amount had been calculated. Horrors again when paint rollers turned up at the dry-dock.
Ken T
R412277
-
Post Thanks / Like
-
10th November 2019, 08:46 AM
#25
Re: Ship Painting Days
I remember a similar situation when electric chipping hammers arrived, overtime out the window, you could cover an area twice as large as a days hammering, also remember making your own little stool for chipping, or use a fender, kt
R689823
-
Post Thanks / Like
-
10th November 2019, 10:21 AM
#26
Re: Ship Painting Days
Originally Posted by
Keith Tindell
I remember a similar situation when electric chipping hammers arrived, overtime out the window, you could cover an area twice as large as a days hammering, also remember making your own little stool for chipping, or use a fender, kt
All air driven on tankers, also had those things that looked like lawn mowers, they must have been a handful; how many of you lads who used this kit suffered from vibration white finger?
-
Post Thanks / Like
-
10th November 2019, 11:54 AM
#27
Re: Ship Painting Days
I never served on tankers, but did, t windy hammers have bronze heads, or some similar metal to prevent sparks ?. I remember hearing the story, true or not, that when the electric chipping hammer arrived, one of the guys seeing his overtime up the Swanee, started the thing up and stuffed the head in a bag of waste !!!, obviously burned the thing out, kt
R689823
-
Post Thanks / Like
-
10th November 2019, 05:29 PM
#28
Re: Ship Painting Days
Originally Posted by
Tony Taylor
suffered from vibration white finger?
Turned out to be a bonus in the bars ashore!
-
Post Thanks / Like
-
10th November 2019, 06:50 PM
#29
Re: Ship Painting Days
Originally Posted by
Keith Tindell
I never served on tankers, but did, t windy hammers have bronze heads, or some similar metal to prevent sparks ?. I remember hearing the story, true or not, that when the electric chipping hammer arrived, one of the guys seeing his overtime up the Swanee, started the thing up and stuffed the head in a bag of waste !!!, obviously burned the thing out, kt
Keith, as far as I recall they did not have bronze heads, however they did carry large kits of bronze tools for work in pump rooms and down tanks, however after the Shell tanker Mactra blew up, Shell carried out extensive research into the cause and discovered that bronze tools were potentially more hazardous than steel.
Apparently the bronze accepted a charge more readily than steel and also discharged more readily with a higher intensity spark; so an order was issued to the fleet, all bronze tools to be dumped over the wall, must have cost a small fortune.
Scroll forward 30 years and imagine my surprise when on a business visit to Shell Stanlow I saw bronze tools in use all over the plant.
-
Post Thanks / Like
-
12th November 2019, 11:43 AM
#30
Re: Ship Painting Days
Any relation to Roy Swan,
3/O with Commons?
-
Post Thanks / Like
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules